SHC 10 AU / SHC 15 AU

  • Made in Germany
  • Point of use installation
  • Space-saving under bench installation
  • Ideal for multiple outlets
  • Suitable for use with all taps
  • Enamelled steel tank manufactured by STIEBEL ELTRON
  • Includes PTR valve and reducing bush
  • Wall-mounted design to easily adjust height
  • Insulated design minimises heat losses
  • Temperature set at 60°C
  • Operates on 6.5 Amp 230V, plugs into power point
Ask Quick Question

Product Overview

Hot water right at the point of use, ideal for multiple outlets

The STIEBEL ELTRON SHC 10 AU and SHC 15 AU under bench mains pressure water heaters deliver hot water quickly to multiple sinks or basins. These point-of-use water heaters eliminate long runs of pipework for isolated sinks and basins and can greatly reduce the waiting time for hot water to arrive at the outlet. Installed directly underneath the basin or sink these water heaters are compact in design to take up less space in the cupboard.

Install Note - Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements

Available at:
Or your local plumbing supply store.

Product Details

High quality design

  • Made in Germany with premium quality parts
  • Certified enamelled steel tank manufactured by STIEBEL ELTRON
  • Designed for 2+ fixture outlets
  • WaterMark approved. Lic No. WMKA00301, AS3498

Energy and water saving

  • Low minimum standby power consumption
  • Installed close to the point of use helps save water

Easy installation

  • Compact space saving design
  • Installed underneath sinks or basins, ideal for mulitple points of use
  • 230V - 3 pin power cord with earthed plug 6.5 Amp
  • Operates with all WELS approved tapware
  • Install Note - Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements


  • 5 year cylinder, 3 year parts & labour and 1 year PTR valve domestic water heater warranty*

Available in 10 litre (SHC 10 AU) or 15 litre (SHC 15 AU) tank capacity.

*Conditions apply - refer warranty policy for full details.

Technical Data

Model number SHC 10 AU SHC 15 AU
Rated output 1.6 kW
Rated voltage 230 V / plugs into GPO
Rated current 6.5 Amp
Phases 1/N/PE
Electrical Installation As per AS/NZS3000
Installation requirements AS/NZS3500.4.2 & local requirements
Permissible operating pressure 600 kPa (supplied PTR valve = 700 kPa)
Temperature setting 60°C
Tank capacity 10 Litres 15 Litres
Mixed water volume at 40°C from single draw off 15.3 Litres 23 Litres
Standby energy consumption / 24 hours at 65°C 0.5 kWh 0.53 kWh
IP Rating IP24 D
Height (incl. PTR valve) 498 mm 523 mm
Width 280 mm 320 mm
Depth 270 mm 318 mm
Weight (filled with water) 17.2 kg 24.0 kg
Colour white
Approvals WaterMark Lic No. WMKA00301, AS3498
For multiple draw off points Yes

Install Note - Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements


File Category Type Download
SHC Data SheetData SheetPDF
1.05 MB
SHC AU Operation & Installation Guide + WarrantyOperation, Installation & WarrantyPDF
2.50 MB
Revit file of STIEBEL ELTRON's SHCTechnical DrawingRFA
604.00 kB
STIEBEL ELTRON Tech Line Drawing SHC10Technical DrawingJPG
887.53 kB
STIEBEL ELTRON Tech Line Drawing SHC15Technical DrawingJPG
885.86 kB
Model & Serial Number LocationSerial Number LocationPDF
3.55 MB


1. Can I install the SHC water heaters with my existing sink mixer?

Yes, the SHC water heaters are mains pressure storage water heaters and can be used with all WELS rated tapware including low flow taps.

2. Can I connect two taps to the SHC mains pressure water heater?

Yes, the SHC water heaters are designed as a multipoint of use water heater and can be operated with multiple taps.

3. How can I tell what size SHC water heater I have?

On top of the water heater between the inlet and outlet the sticker will advise the size SHC 10 AU or SHC 15 AU. Within the download section of the SHC you can download a pdf showing you exactly where and how to locate this sticker.

4. Do these water heaters create hot water that is hot enough to make tea and coffee?

No, the SHC is designed to provide hot and cold water to a sink. These units are not a boiling or chilled system.

5. If I run out of hot water how long will it take for the SHC 10 AU to have another 10 litres of hot water available?

The SHC 10 AU can deliver another 10 litres of 60°C hot water after approximately 29 minutes, based on cold water temperature of 20°C.

6. I want to wash dishes in the sink, what size SHC do I need?

This will be dependant on the sink size, however we recommend the SHC 15 AU if a larger volume of hot water is required.

7. Where can I purchase the SHC water heater from?

The SHC is available from all leading plumbing stores.

Install Note - Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements

Ask Quick Question