Products
CK 20 Premium
- Wall-mounted fan heater
- Fast room heating
- Operating controls with illuminated LCD screen
- Weekly timer, 120-minute timer, frost protection and open window detection
- Controller with self-learning capability
- ON/OFF switch and overheating protection
SNU 5 Plus / SNU 10 Plus
- Under sink design
- Save energy and water through its point-of-use design
- Must be used with specialised STIEBEL ELTRON open vented sink mixer
- Very low energy losses
- Easy installation
- Plug-in appliance for easy installation
VRC-W 450 / VRC-W 600
- Centralised ventilation for optimum air quality
- Suitable for extreme temperatures from -20°C to +50°C
- Connect to the MyStiebel App for easy operation
- Elegant design with easy-to-clean filters
- Energy-efficient with heat recovery and passive cooling options
CNS 2000 Plus LCD Move
- Elegant freestanding design with a timeless casing
- Available in white or black
- High heating output despite slimline construction
- Safe with pendulum switch, turning off if knocked over
- Splash proof and suitable for bathroom use (IP24)
- Features an easy-to-use electronic controller with LCD screen
CNS-B 2000 Plus LCD Move
- Striking freestanding design in a sleek black finish
- High heating performance while maintaining a slim profile
- Equipped with a pendulum safety switch that turns off if tipped over
- IP24-rated splash protection
- Intuitive electronic controller with an LCD screen for easy operation
DHE 18 AU / DHE 27 AU
- German engineered and manufactured
- Premium three-phase continuous flow water heater
- Precise hot water up to 60°C with advanced 4i Technology
- Intelligent electronic control for comfort and efficiency
- 7-year full parts and labour domestic warranty*
WPL-A 07
- Air source heat pump for heating, hot water and cooling
- Inverter technology provides adjusted heating output
- High flow temperatures of up to 75 °C enable high DHW temperatures and mixed water volumes
- Low operating costs through high efficiency all year round
- Smart Grid ready for connection to solar PV and energy management systems
WPE-I 04 / 06 / 08 / 12 / 15 H 230
- Geothermal heat pump for hot water and heating
- Year-round optimal operation and maximum efficiency thanks to inverter technology
- High flow temperatures of up to 75°C
- Future-proof and environmentally friendly refrigerant
- Quiet operation
HOT 2.6 N Premium
- Instant boiling water
- Compact, slim design
- Includes 3in1 or mono tap
SHC 10 AU / SHC 15 AU
- Space-saving under sink or under basin design
- Can service multiple points
- Suitable for use with all hot water taps
- Save energy and water through its point of use design
DHCE 6/50 / DHCE 8/50
- Designed for Australian conditions
- Maximum hot water output temperature 50°C:
no tempering valve needed (approved to AS3498) - Electronically controlled for accurate temperature delivery
SBP Buffer Cylinders
- Problem solver in complex hydronic heating systems
- 100 - 1500 L capacity
- Made in Germany
- Solar thermal systems compatible models
Underfloor Heating Mats: FTM and FTB
- Electronic controller with WiFi-connectivity
- Mats can be adapted to fit around fixtures
- Helps prevent mould by drying quickly
- Mats are available in a number of sizes
Ultronic
- Under 12 second hand drying time
- Quiet operation
- Hygienic touch-free operation
- Plastic or brushed stainless steel casing
- HEPA filtration for room sanitation
Stream 4 Filter Cartridge Set
- Replacement filter set for the Stream 4
- Includes 4 filter cartridges
WPL-A Trend
- Air source heat pump for heating, hot water and cooling
- Inverter technology provides adjusted heating output
- High flow temperatures of up to 75 °C enable high DHW temperatures and mixed water volumes
- Low operating costs through efficient R290 technology all year round
- Smart Grid ready for connection to solar PV and energy management systems
VRC-C 450 Trend
- Central ventilation system with efficient heat recovery
- Continuously supplies fresh, filtered outdoor air
- Extracts stale, moist air from kitchens and bathrooms
- Reduces heat loss to support energy-efficient buildings
- Designed for modern, well-insulated homes and light commercial spaces
CK 20 Plus
- Wall-mounted fan heater
- Fast room heating
- High quality design with an aluminium front
- Quiet cross flow fan
- ON/OFF switch and overheating protection
Design-Kollektion 3in1 Tap
- Efficient hot, cold, and boiling water
- Available in four stunning colors
- Designed for easy installation and seamless integration
Design-Kollektion Gooseneck Open Vented Sink Mixer
- Elegant gooseneck design
- Delivers hot and cold water to a single fixture
- Compatible exclusively with the SNU Plus open-vented water heater
- Premium finishes to match various interiors
- Ideal for kitchen sinks in home or commercial use
CNS Plus LCD
- Stylish, wall-mounted convector heater
- Silent operation with precise temperature control
- Easy-to-use LCD screen with weekly timer
- Self-learning preheating and open window detection
- Overheating protection for safety
- Ideal for standalone or supplementary heating
Stream 3 Filter Cartridge Set
- Replacement filter set for the Stream 3
- Includes 3 filter cartridges
LWZ 180 / LWZ 280
- Centralised ventilation with up to 94% heat recovery
- Inbuilt display directly on the appliance
- Significantly reduced noise levels
- Helps prevent condensation and mould through improved ventilation
- Air flow rates 60 - 350 m3/h
- ERV core available for humidity management
DEL 13 / 18 / 27 Plus
- German engineered and manufactured
- Available in three output sizes for different applications
- Delivers hot water up to 50°C with no tempering valve required
- Continuous flow with 3i Technology for consistent performance
- 7-year full parts and labour domestic warranty*
DHCE 8/60
- Delivers up to 60°C hot water - dependent on incoming cold water temperature
- Electronically controlled
- Compact design for space saving installation
WPL 25 AC / WPL 25 ACS
- Perfect fit for the standard Australian family home
- Made in Germany with premium quality parts
- Energy efficient operation delivers exceptional
COP of 5 - Outdoor installation to harvest energy from the air and turn it into comfortable heat for your home
- SmartGrid and solar PV ready to integrate in-home energy management system
SBB 302-501 WP SOL DHW Cylinders
- Provides domestic hot water in conjunction with a hydronic heat pump
- 290 - 495 L hot water capacity
- Solar thermal compatible
- Made in Germany
SHP-O 201 Premium / SHP-O 301 Premium
- Made by STIEBEL ELTRON, excellence for 100 years
- R290 refrigerant with low GWP
- Control and monitor hot water from anywhere with the MyStiebel App
- Quiet operation
- Solar PV compatible - optimises self-consumption (SG Ready)
- Available in two tank capacities: 200 or 300 litres
- Active defrost for all climate zones
SHP-O 200 Plus / SHP-O 300 Plus
- Made by STIEBEL ELTRON, excellence for 100 years
- R290 refrigerant with low GWP
- Control and monitor hot water from anywhere with the MyStiebel App
- Quiet operation
- Solar PV compatible - optimises self-consumption (SG Ready)
- Available in two tank capacities: 200 or 300 litres
Design-Kollektion Fixed Open Vented Sink Mixer
- Compact and space-saving fixed spout
- Smooth and precise water flow control
- Seamless integration with the SNU Plus 5L and 10L units
- Premium finishes for a modern aesthetic
DEM 6 + Sensor Tap
- Mini instantaneous water heater
- Bundled with automatic sensor tap
- Maximum hot water output temperature 50°C: no tempering valve needed (approved to AS3498)
- Compact undersink installation (hardwired)
CNS Trend
- Smart LCD control unit
- Energy saving features, such as 7-day timer and open window detection
- Quiet, even heat distribution
- Ideal for asthma and allergy sufferers with convection heating
- Easy wall mounted installation
VCR 180 MC
- Compact and discrete roof installation
- Replaces indoor air with filtered fresh air from outside, ideal for asthma and allergy sufferers
- Helps prevent condensation and mould through improved ventilation
- Energy efficient with up to 87% heat recovery
- Designed for air flow rates of 50-180 m3/h
DHB-E 13 / 18 / 27 LCD
- German engineered and manufactured
- Electronically controlled for accurate hot water delivery
- Continuous flow temperature selection from 20°C to 60°C
- Reliable performance for both hard and soft water areas
- Proven DHB-E LCD design with modern convenience
SBS Instantaneous Water Cylinders
- Provides instantaneous domestic hot water
- Compatible with all STIEBEL ELTRON hydronic heat pumps
- 599- 1399 L buffer capacity
- Made in Germany
- Solar thermal compatible
VLR 70 S / VLR 70 L
- Decentralised ventilation
- Up to 92% heat recovery
- Quiet operation - supplies fresh air from outside to in your home or office
- Installed in pairs, connect up to 8 units together
- Prevents mould growth
HSBC 300 Cool AU
- Made in Germany
- Combi appliance comprising a domestic hot water tank and a buffer tank
- Halves the installation space required for individual tanks
- Compact, compatible and energy saving for use in detached houses
CNS Trend M
- Wall mounted convection electric heater
- Modern, slimline design
- Quiet, even heat distribution
- Variable temperature selection
- Easy wall mounted installation
WWK 222H and WWK 302H
- Made by STIEBEL ELTRON, excellence for 100 years
- Designed for diverse Australian conditions
- Solar PV ready to run off PV-system
- Quiet operation with encased compressor design
- Maintenance-free current impressed anode suitable for hard or soft water areas
- Available in two tank capacities: 220 or 302 litres
- H models contain a smart element to aid hot water recovery for high use of hot water.
MES open vented standard single lever sink mixer
- Standard sink mixer design
- 3 star WELS rating
- Maximum 8L/min flow rate
- Suitable to use with the SNU under sink open vented water heater
- This mixer requires a 38mm hole for installation
- Extended lever also available (sold separately)
WPE-I 33 / 44 / 59 / 87
- Geothermal hydronic heat pump for domestic or commercial applications
- 20.18 - 52.00 kW heating output
- Cascade up to 16 geothermal heat pumps for higher output
- Easy system control
- Quiet operation
FET Controller
- Remote control with thermostat function for the WPM
- Installed inside the home
- Touch wheel operation
- Room temperature and humidity measurement
VRL-C G Premium
- Ventilation for schools, childcare centres, offices and community halls
- Purifies the air and reduces aerosol concentration
- Up to 92% heat recovery
- Easy installation, even in retrofit projects
- Additional accessories include CO2 sensor, VOC sensor, and motion sensor
DHF 13 C AU / DHF 15 C AU
- Hydraulically controlled
- Replacement type water heater for certain types of 3 phase electric instantaneous water heaters in New South Wales
- Two-stage temperature and output selection
WPM Controller
- Heat pump manager in a designer wall mounting enclosure
- Cooling control function
- Screed heat-up program
- Control the cascade of two heat pumps or the control of one direct heating circuit and two heating circuits with mixer.
FFB 4 Remote Control
- Additional radio remote control with large LC display
- Two memory buttons for desired temperatures
- Stepless temperature selection from 20° C to 60° C
- Range up to 25 meters in the building
- Set includes radio adapter
MEW open vented short spout sink mixer
- Short spout design
- 3 star WELS rating
- Maximum 8L/min flow rate
- Suitable to use with the SNU under sink open vented water heater
- This mixer requires a 38mm hole for installation
- Extended lever also available (sold separately)
LWZ 70 E
- Ventilation with up to 90% heat recovery
- Centralised ventilation
- Replaces indoor air with fresh filtered air from outside
- Helps prevent condensation and mould through improved ventilation
- Ideal for small apartments
- Designed for air flow rates of 50-180 m3/h
ISG Web
- Control and monitor your heat pump via a web interface
- Viewable on a standard browser via an integral web interface or mobile device
- Communicates to the STIEBEL ELTRON customer service centre
LWZ 170 E PLUS
- Ventilation with up to 90% heat recovery
- Centralised ventilation
- Replaces indoor air with fresh filtered air from outside
- Helps prevent condensation and mould through improved ventilation
- Ideal for low energy homes and passive houses
- Designed for air flow rates of 100-300 m3/h