DHF 13 C AU / DHF 15 C AU
- Designed for Australian conditions
- Hydraulically controlled
- Replacement type water heater for certain types of 3 phase electric instantaneous water heaters in New South Wales
- Two-stage temperature and output selection
Product Overview
Instantaneous hot water when needed.
The STIEBEL ELTRON DHF C AU is a hydraulically controlled instantaneous three phase electric water heater with a two-stage temperature selection that offers maximum performance and has a compact design to be installed in the tightest of spaces. Designed as a replacement hot water system for certain types of three phase electric instantaneous water heaters in New South Wales.
Product Details
High quality STIEBEL ELTRON design
- Designed for Australian conditions
- Hydraulically controlled
- DHF incorporates a control valve that compensates automatically for most pressure fluctuations in the water supply.
- Two-stage temperature and output selection
- WaterMark approved, Lic No.WMKA00301, AS3498
- 5 year domestic warranty*
Installation flexibility
- Compact in size for space saving installation
- No safe tray or drainage required
Available in electrical size:
- DHF 13 C AU - 14.6kW, 20 Amps per phase, three phase 415V
- DHF 15 C AU - 16.1kW, 22.5 Amps per phase, three phase 415V
*Conditions apply.
Technical Data
| Model number | DHF 13 C-AU | DHF 15 C-AU |
| Rated output (415V) | 14.2kW | 16.1kW |
| Rated current (415V) | 19.7Amp | 22.5Amp |
| Phases | 3/P/PE | 3/P/PE |
| Electrical Installation | As per AS/NZS3000 | |
| Installation requirements | AS/NZS3500.4.2 & local requirements | |
| Switch on flow rate (minimum flow rate required to switch on the water heater) |
Half power 2.5L/min Full power 3.7L/min |
Half power 3.0L/min Full power 4.5L/min |
| Normal output (dial selection) 415V |
Position • 7.1kW Positon •• 14.2kW |
Position • 8.05kW Positon •• 16.1kW |
| Permissible operating pressure | 1000kPa | 1000kPa |
| Temperature adjustment | N/A | N/A |
| IP Rating | IP24 | IP24 |
| Height | 370mm | 370mm |
| Width | 220mm | 220mm |
| Depth | 130mm | 130mm |
| Weight | 4kg | 4kg |
| Colour | white | white |
| Nominal capacity | 0.6L | 0.6L |
| Approvals | WaterMark Lic No. WMKA00301, AS3498 | |
| For one/several draw off points | Yes/Yes | Yes/Yes |
| Heating system | Copper Tubular | Copper Tubular |
Downloads
| File | Category | Type | Download |
|---|---|---|---|
Looking for BIM / Revit files? Click here! | |||
| DHF Datasheet | Data Sheet | PDF 745.10 kB | |
| DHF Operation & Installation Guide and Warranty | Operation, Installation & Warranty | PDF 2.38 MB | |
| DHF Warranty | Warranty | PDF 110.40 kB | |
| DHF Tech Line Drawing | Technical Drawing | JPG 421.66 kB | |
| DHF Exploded Diagram | Exploded Diagram | PDF 170.67 kB | |
| Serial Number Location 2021 | Serial Number Location | PDF 3.46 MB | |
FAQ
The DHF hot water system is hydraulically controlled and as such you may have fluctuation issues if installed in conjunction with water saving tapware and shower roses.
We recommend the use of an electronically controlled system such as the DHE AU, DHB-E AU or DEL AU 3 phase instantaneous water heaters for new applications and buildings.
Your electrician can advise what size the fuses are for your existing hot water unit, this will confirm the appropriate replacement model. The DHF C-AU 13 is 19.7 Amps per phase and the DHF C-AU 15 is 22.5 Amps per phase.
Yes, our spare parts division can assist with parts for the DHF C-AU. Our service and spare parts division can be contacted on 1800 153 351.
Please call our STIEBEL ELTRON service department on 1800 153 351 and follow the prompts for our service department.
Underneath the hot water unit, there is a rating label located on the bottom, in between the inlet and outlet. This will show the model and size - DHF 13 C-AU or DHF 15 C-AU. Within the downloads section of the DHF C-AU, you can download a pdf showing you exactly where and how to locate this sticker.
All the major plumbing supply merchants can supply our products.